Hybrid Convertible Set™ - Loaded Pickguard

180506 Legacy Loaded Guard.png
180506 Legacy Loaded Guard.png

Hybrid Convertible Set™ - Loaded Pickguard

$560.00
Quantity:
Add To Cart

In This Set

  • Bridge: The Convertible for Bridge™ (BCH4)

  • Middle: Vintage Single 2™ (SV2)

  • Neck: Vintage Single 5 Overwound™ (SV5O)

Description

The Hybrid Convertible Set combines the great split tone and powerful, clear normal tone of our Convertible with the versatile Strat® tones of our Texas Blues Set™. Combine this set with a push pot to actuate the Silent Split™ and a blender pot for fantastic neck/bridge tones and you have a set with go to single coil and a unique humbucker tone in the bridge.

This set utilizes 1 500 k audio taper push/pull pot as a volume and split switch for the bridge pickup, 1 250 k no load audio taper pot as a dedicated bridge tone and 1 500 k audio taper no load pot wired as a neck and middle tone. The push/pull pot is wired with the split down. Other control and wiring options are available by special order. Pricing may vary.

Z-Series Equivalent: Z-Series Hybrid Convertible Set™

Check out the Loaded Pickguard Gallery.

Assembly Information

One Split

  • Loaded pickguards are fully wired with pickups, controls, 5-way switch and capacitor along with pickguard, knobs and switch tip of your choice.

  • Select colors for covers, pickguards, knobs and switch tip at checkout.

  • If you wish to use your own pickguard, knobs and switch tip and have us pre-wire the pickups and controls only (mounted on a cardboard template), order an "assembled set" here.

  • We use the "modern" 11 hole pickguard pattern. Other hole patterns are available by special order. Pricing may vary.

  • We configure our loaded pickguards with our best wiring and control recommendation. Other control and wiring options are available by special order. Pricing may vary.

  • For Assembled and Loaded Pickguard Convertible sets (wired to controls), the default is to wire the switch(es) so that the split is on when the push/pull is down, series mode up. If you wish to have it wired split up, please let us know by email.

  • The default for Push pots is the CTS push/pull. If you'd prefer to substitute push/push, let us know by email.

Please Note

  • Pickups may take 10-15 days before ready for shipment.

  • We have limited availability of left handed parts. Please contact us for left-handed loaded pickguards and assembled sets.

  • USPS First Class International Postage is not available for orders over $400 USD. Only USPS Priority International or Priority Express International are available over $400 USD.