Description

Master Volume, Master Tone, Blend and 2 Silent Splits with 250k load

This controls kit consists of 2 250k audio taper push/pull and 1 250k linear taper no load potentiometer. With most Zexcoil pickups, we recommend 500k potentiometers to minimize loading, but for our Convertible Series, the higher loading of 250k potentiometers may be desired, especially if the emphasis is on the single coil mode. This set enables a master volume, master tone and a neck/bridge blend with two Silent Splits. Use the push pots to actuate the Silent Splits and as master volume and master tone. In Kit 7, use the no load linear taper pot as the neck/bridge blend. In kit 7A, use the 500k push/pull plot as the blend, and use the no load audio taper pot as the master tone.

Specs

• Kit #7: (2) CTS 250k audio taper push/pull pots (1) 250k linear taper no load pot

• Kit #7A: (1) 250k audio taper push/pull pots (1) CTS 500k audio taper push/pull pot, (1) CTS 250k no load audio taper pot

Recommendations

Recommended for: Hybrid Sets and Signature Sets with blend capability where 2 Silent Splits are required.